AD-828

Common Applications:

Supply Chain, Inventory and Logistics

Dimensions: 0.59 x 1.58 in [15 x 40 mm]

Operating Frequency: Global (860 - 960MHz)

RF Protocol: ISO-18000-6C, EPC Class 1 Gen 2

Chip: Impinj Monza 3

EPC Memory: 96 bits

TID Memory:

866-903-RFID (7343) / rfid.info@averydennison.com

Part Number	600208
Format	N/A
Antenna dimensions (CDxMD)	0.591 x 1.575 in [15 x 40 mm]
Die-cut dimensions	N/A
Inlay substrate material	PET
Inlay-to-liner adhesive	N/A
Liner material	N/A
Face sheet	N/A
Standard pitch	1.75 in [44.45 mm]
Standard web width	0.748 in [19 mm]
Total thickness over chip	11 mils [279 microns]
Operating temperature	-40 to 185 F [-40 to 85 C]
RoHS	Designed to comply with EU Directive 2011/65/EU
Quality assurance	100% read tested with out-of-tolerance inlay marked
Un-wind direction	Inlay-side Out
Core size with adaptor insert	3 in [76.2 mm]
Maximum roll outer diameter (not to exceed)	12 in [305 mm]
Average # of units per roll	10,000
Rev	03

CARE AND HANDLING RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a minimum.

APPLICATIONS This product should be tested by the customer/user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

WARRANTY Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

PRODUCT CHANGES Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice.

TRADEMARK STATEMENT Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.