- Apparel and Retail
- Library, Media, Documents and Files
Dimensions: 1.85 x 1.85 in [47 x 47 mm]
Operating Frequency: 13.56MHz
RF Protocol: ISO-15693, 18000-3 Mode 1
Chip: NXP ICODE SLIX
|Antenna dimensions (CDxMD)||1.85 x 1.85 in [47 x 47 mm]||1.85 x 1.85 in [47 x 47 mm]|
|Die-cut dimensions||N/A||2 x 2 in [50.8 x 50.8 mm]|
|Inlay substrate material||PET||PET|
|Inlay-to-liner adhesive||N/A||S490 emulsion acrylic (Fasson)|
|Liner material||N/A||40#SCK (Fasson)|
|Standard pitch||2.125 in [54 mm]||2.125 in [54 mm]|
|Standard web width||2.125 in [54 mm]||2.125 in [54 mm]|
|Total thickness over chip||N/A||N/A|
|Operating temperature||-40 to 185 F [-40 to 85 C]||-40 to 185 F [-40 to 85 C]|
|RoHS||EU Directive 2011/65/EU Compliant||EU Directive 2011/65/EU Compliant|
|Quality assurance||100% tested and out of tolerance inlay marked||100% tested good prior to shipment|
|Un-wind direction||Inlay-side Out||Inlay-side Out|
with adaptor insert
|3 in [76.2 mm]||3 in [76.2 mm]|
|Maximum roll outer
diameter (not to exceed)
|13 in [330.2 mm]||13 in [330.2 mm]|
|Average # of units per roll||5000||5000|
CARE AND HANDLING RFID inlays are sensitive to ESD. Observe standard practices to keep environmental static charge to a minimum.
APPLICATIONS This product should be tested by the customer/user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.
WARRANTY Please refer to Avery Dennison RFID standard terms and conditions. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
PRODUCT CHANGES Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice.
TRADEMARK STATEMENT Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.