AD-714x

Common Applications:

  • Library, Media, Documents and Files

North America:
866-903-RFID (7343)

International Support:
+1-770-965-0807

HF RFID Inlays: AD-714x

AD-714x

AD-740 inlays
   
Dimensions: 1.77 x 3 in [45 x 76.2 mm]
Operating Frequency: 13.56MHz
RF Protocol: ISO-15693, 18000-3 Mode 1
Chip: NXP ICODE SLIX
User Memory 896-bit EEPROM Read/Write
Part Number RF700039 RF700040
Format Dry Inlay Wet Inlay
Antenna dimensions (CDxMD) 1.77 x 3.0 in
(45 x 76.2 mm)
1.77 x 3.0 in
(45 x 76.2 mm)
Die-cut dimensions N/A 1.93 x 3.19 in (49 x 81 mm)
Inlay substrate material Clear PET Clear PET
Inlay-to-liner adhesive N/A S-490 (FASSON)
Liner material N/A 40#SCK
Face sheet N/A N/A
Standard pitch 3.375 in (85.7 mm) 3.375 in (85.7 mm)
Standard web width 2.125 in (53.98 mm) 2.125 in (53.98 mm)
Total thickness over chip 8.7 – 10.7 mils
(221 - 272 microns)
11.9 – 13.9 mils
(302 - 353 microns)
Operating temperature -40 to 185 F [-40 to 85 C] -40 to 185 F [-40 to 85 C]
RoHS EU Directive
2011/65/EU Compliant
EU Directive
2011/65/EU Compliant
Quality assurance 100% read tested
with-of-tolerance inlay marked
100% read tested
with-of-tolerance inlay marked
Un-wind direction Inlay-side Out PS Inlay-side Out
Core size
with adaptor insert
3 in (76.2mm) 3 in (76.2mm)
Maximum roll outer
diameter (not to exceed)
13 in (330.2 mm) 13 in (330.2 mm)
Average # of units per roll 5,000 good +/- 10% 5,000 good +/- 10%
Rev 01 01


Downloads

AD-714x HF RFID Inlay Datasheet

425 KB (PDF)

Product Portfolio: Avery Dennison RFID Solutions

864 KB (PDF)

CARE AND HANDLING: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

APPLICATIONS: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

WARRANTY: Please refer to Avery Dennison RFID standard terms and conditions.

PRODUCT INFORMATION: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

TRADEMARK STATEMENT: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.

© 2016 Avery Dennison Corp. ALL RIGHTS RESERVED.
170 Monarch Lane, Miamisburg, OH 45342, USA

Third party trademarks and/or trade names used herein are the property of their respective owner(s).

Some of the trademarks appear for identification purposes only.

*RAIN RFID is a global alliance promoting the universal adoption of UHF RFID technology. RAIN uses the GS1 UHF Gen2 protocol which ISO/IEC has standardized as 18000-63. Learn more about RAIN RFID here.

Get in Touch
Have questions about which Avery Dennison RFID solutions are right for your business?
Contact our RFID Sales Team.