AD-709x

Common Applications:

  • Library, Media, Documents and Files

North America:
866-903-RFID (7343)

International Support:
+1-770-965-0807

HF RFID Inlays: AD-709x

AD-709x

AD-740 inlays
   
Dimensions: 1.85 x 1.85 in [47 x 47 mm]
Operating Frequency: 13.56MHz
RF Protocol: ISO-15693, 18000-3 Mode 1
Chip: NXP ICODE SLIX
User Memory 896-bit EEPROM Read/Write 
Part Number RF700037 RF700038 RF750016
Format Dry Inlay PS Inlay Paper Label
Antenna dimensions (CDxMD) 1.85 x 1.85 in
(47 x 47 mm)
1.85 x 1.85 in
(47 x 47 mm)
1.85 x 1.85 in
(47 x 47 mm)
Die-cut dimensions N/A 2 x 2 in
(50 x 50 mm)
2 x 2 in
(50 x 50 mm)
Inlay substrate material PET PET PET
Inlay-to-liner adhesive N/A S490 (Fasson) S490 (Fasson)
Liner material N/A 40# SCK 40# SCK
Face sheet N/A N/A 47.8# TT 1C (Fasson)
Standard pitch 2.125 in (54 mm) 2.125 in (54 mm) 2.125 in [54 mm)
Standard web width 2.125 in (54 mm) 2.125 in [54 mm) 2.125 in [54 mm)
Total thickness
over chip
8.7 – 10.7 mils
(221 – 272 µm)
11.9 – 13.9 mils
(302- 353 µm)
15.1 – 17.1 mils
(384 – 434 µm)
Operating
temperature
-40º to 185 ºF
(-40º to 85 ºC)
-40º to 185 ºF
(-40º to 85 ºC)
-40º to 185 ºF
(-40º to 85 ºC)
RoHS EU Directive
2011/65/EU Compliant
EU Directive
2011/65/EU Compliant
EU Directive
2011/65/EU Compliant
Quality assurance 100% read tested
with-of-tolerance
inlay marked
100% read tested
with-of-tolerance
inlay marked
100% read tested
with-of-tolerance
inlay marked
Un-wind direction Inlay-side Out Inlay-side Out Inlay-side Out
Core size
with adaptor insert
3 in (76.2 mm) 3 in (76.2 mm) 3 in (76.2 mm)
Maximum roll
outer diameter
(not to exceed)
13 in (330.2 mm) 13 in (330.2 mm) 7.48 in (190 mm)
Average # of units
per roll
5,000 5,000 1,500 verified
Rev 01 01 00


Downloads

AD-709x HF RFID Inlay Datasheet

425 KB (PDF)

Product Portfolio: Avery Dennison RFID Solutions

864 KB (PDF)

CARE AND HANDLING: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

APPLICATIONS: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

WARRANTY: Please refer to Avery Dennison RFID standard terms and conditions.

PRODUCT INFORMATION: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

TRADEMARK STATEMENT: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.

© 2016 Avery Dennison Corp. ALL RIGHTS RESERVED.
170 Monarch Lane, Miamisburg, OH 45342, USA

Third party trademarks and/or trade names used herein are the property of their respective owner(s).

Some of the trademarks appear for identification purposes only.

*RAIN RFID is a global alliance promoting the universal adoption of UHF RFID technology. RAIN uses the GS1 UHF Gen2 protocol which ISO/IEC has standardized as 18000-63. Learn more about RAIN RFID here.

Get in Touch
Have questions about which Avery Dennison RFID solutions are right for your business?
Contact our RFID Sales Team.