AD-383u7

Common Applications:

  • Apparel and Retail
  • Logistics and Supply Chain Inventory

North America:
866-903-RFID (7343)

International Support:
+1-770-965-0807

AD-383u7

AD-740 inlays
   
Dimensions: 1.97 x 1.18 [50 x 30mm]
Operating Frequency: Global (860 - 960MHz)
RF Protocol: ISO-18000-6C, EPC Class 1 Gen 2
Chip: NXP UCODE 7
EPC Memory: 128 bit
TID Memory: 96 bit, pre-encoded for multi-vendor chip (MCS)
based serialization, factory programmed
Part Number 600527 600465
Format Dry Inlay PS Inlay
Antenna dimensions (CDxMD) 1.969 x 1.181 in [50 x 30 mm] 1.969 x 1.181 in [50 x 30 mm]
Die-cut dimensions N/A 2.126 x 1.34 in [54 x 34.01 mm]
Inlay substrate material PET PET
Inlay-to-liner adhesive N/A S-490 (Fasson)
Liner material N/A 1.5M Clear PET
Face sheet N/A N/A
Standard pitch 1.50 in [38.1 mm] 1.50 in [38.1 mm]
Standard web width 2.13 in [54 mm] 2.28 in [58 mm]
Total thickness over chip 10 - 13 mils [254 - 330.2 microns] 10 - 13 mils [254 - 330.2 microns]
Operating temperature -40 to 185 F [-40 to 85 C] -40 to 185 F [-40 to 85 C]
RoHS EU Directive 2011/65/EU Compliant
EU Directive 2011/65/EU Compliant
Quality assurance 100% read tested with
out-of-tolerance inlay marked
100% read tested with
out-of-tolerance inlay marked
Un-wind direction Inlay-side Out Inlay-side Out
Core size
with adaptor
insert
3 in [76.2mm ] 3 in [76.2mm]
Maximum roll
outer diameter
(not to exceed)
13 in [330.2 mm] 13 in [330.2 mm]
Average # of units
per roll
15,000 verified 10,000 verified
Rev 00 00


Downloads

AD-383u7 UHF RFID Datasheet

262 KB (PDF)

Product Portfolio: Avery Dennison RFID Solutions

864 KB (PDF)

CARE AND HANDLING: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

APPLICATIONS: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

WARRANTY: Please refer to Avery Dennison RFID standard terms and conditions.

PRODUCT INFORMATION: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

TRADEMARK STATEMENT: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.

© 2017 Avery Dennison Corp. ALL RIGHTS RESERVED.
170 Monarch Lane, Miamisburg, OH 45342, USA

Third party trademarks and/or trade names used herein are the property of their respective owner(s).

Some of the trademarks appear for identification purposes only.

*RAIN RFID is a global alliance promoting the universal adoption of UHF RFID technology. RAIN uses the GS1 UHF Gen2 protocol which ISO/IEC has standardized as 18000-63. Learn more about RAIN RFID here.

Get in Touch
Have questions about which Avery Dennison RFID solutions are right for your business?
Contact our RFID Sales Team.