AD-236u7

Common Applications:

  • Apparel and Retail
  • Supply Chain, Inventory and Logistics

North America:
866-903-RFID (7343)

International Support:
+1-770-965-0807

UHF RFID Inlay: AD-236u7

AD-236u7

AD-380iM inlays
   
Dimensions: 70 x 14.5mm  
Operating Frequency: Global [860—960 MHz]
RF Protocol: ISO-18000-6C, EPC Class 1, Gen 2
Chip: NXP UCODE 7
EPC Memory: 128 bit
TID Memory: 96-bit Tag IDentifier [TID] factory locked 48-bit unique



Part Number RF600551 RF600480 RF100306
Format Dry Inlay - Wide Web Wet Inlay Pressure Sensitive Label
Antenna dimensions [CDxMD] 2.756 x 0.571 in
[70.0 x 14.5 mm]
2.756 x 0.571 in
[70.0 x 14.5 mm]
2.756 x 0.571 in
[70.0 x 14.5 mm]
Die-cut dimensions N/A 2.881 x 0.696 in
[73.18 x 17.68 mm]
3.0 x 0.8 in
[76.2 x 20.3 mm]
Inlay substrate material Clear PET Clear PET N/A
Inlay-to-liner adhesive N/A S-490 S-490
Liner material N/A 1.5M Clear PET 40# SCK
Face sheet N/A N/A 55# 2C Bright White
Standard pitch 0.875 in [22.3 mm] 0.875 in [22.2 mm] 1.5 in [38.1 mm]
Standard web width 2.913 in [74 mm] 3.0 in [76.2 mm] 3.25 in [82.6 mm]
Total thickness over chip 9-10 mils [228.6-254 microns] 10-12 mils [254-304.8 microns] 10-13 mils [254-330.2 microns]
Operating temperature -40 to 185 F
[-40 to 85 C]
-40 to 185 F
[-40 to 85 C]
-40 to 185 F
[-40 to 85 C]
RoHS EU Directive 2011/65/EU Compliant EU Directive 2011/65/EU Compliant EU Directive 2011/65/EU Compliant
Quality assurance 100% read tested with out-of-tolerance inlay marked 100% read tested with out-of-tolerance inlay marked 100% read tested with out-of-tolerance inlay marked
Un-wind direction Inlay side-out PS Inlay side-out Label side-out
Core size
with adaptor insert
6 in [152 mm] 3 in [76.2mm] 3 in [76.2 mm]
Maximum roll outer
diameter [not to exceed]
17 in [431.8 mm] 13 in [330.2mm] 15.25 in [387.4 mm]
Average # of units per roll 40,000 good +/- 10% 10,000 good +/- 10% 12,500 good +/- 5%
Rev 01 01 02


Downloads

AD-236u7 RFID Datasheet

196 KB (PDF)

Product Portfolio: Avery Dennison RFID Solutions

864 KB (PDF)

CARE AND HANDLING: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

APPLICATIONS: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

WARRANTY: Please refer to Avery Dennison RFID standard terms and conditions.

PRODUCT INFORMATION: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

TRADEMARK STATEMENT: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.

© 2017 Avery Dennison Corp. ALL RIGHTS RESERVED.
170 Monarch Lane, Miamisburg, OH 45342, USA

Third party trademarks and/or trade names used herein are the property of their respective owner(s).

Some of the trademarks appear for identification purposes only.

*RAIN RFID is a global alliance promoting the universal adoption of UHF RFID technology. RAIN uses the GS1 UHF Gen2 protocol which ISO/IEC has standardized as 18000-63. Learn more about RAIN RFID here.

Get in Touch
Have questions about which Avery Dennison RFID solutions are right for your business?
Contact our RFID Sales Team.