AD-227m5

Common Applications:

  • Apparel and Retail
  • Supply chain, Inventory and Logistics

North America:
866-903-RFID (7343)

International Support:
+1-770-965-0807

UHF RFID Inlay: AD-227m5

AD-227m5

AD-380iM inlays
   
Dimensions: 3.741 x 0.326 in [95.03 x 8.15 mm]
Operating Frequency: Global (860-960MHz)
RF Protocol: ISO-18000-6C, EPC Gen 2 compliant
Chip: Impinj® Monza® 5
EPC Memory: 128 bit
TID Memory: 96 bits with 48 bit unique serial number
User Memory 32 bit
Part Number 600366 600367 600368 600375
Format Dry Inlay - Wide Web Dry Inlay PS Inlay Dry Inlay - Reverse Wind
Antenna dimensions (CDxMD) 3.741 x 0.326 in
[95.03 x 8.15 mm]
3.741 x 0.326 in
[95.03 x 8.15 mm]
3.741 x 0.326 in
[95.03 x 8.15 mm]
3.741 x 0.326 in
[95.03 x 8.15 mm]
Die-cut dimensions na na 3.885 x 0.44 in
[98.7 x 11.2 mm]
na
Inlay substrate material PET PET PET PET
Inlay-to-liner adhesive na na Fasson S-490 na
Liner material na na PET na
Face sheet na na na na
Standard pitch 0.625 in
[15.88 mm]
0.625 in
[15.88 mm]
0.625 in
[15.88 mm]
0.625 in
[15.88 mm]
Standard web width 4.75 in
[120.65 mm]
3.875 in
[98.43 mm]
4.125 in
[104.78 mm]
3.875 in
[120.65 mm]
Total thickness over chip N/A N/A N/A N/A
Operating temperature -40 to 185 F
[-40 to 85 C]
-40 to 185 F
[-40 to 85 C]
-40 to 185 F
[-40 to 85 C]
-40 to 185 F
[-40 to 85 C]
RoHS EU Directive 2011/65/EU Compliant EU Directive 2011/65/EU Compliant EU Directive 2011/65/EU Compliant EU Directive 2011/65/EU Compliant
Quality assurance 100% read tested with out-of-tolerance inlay marked 100% read tested with out-of-tolerance inlay marked 100% read tested with out-of-tolerance inlay marked 100% read tested with out-of-tolerance inlay marked
Un-wind direction Inlay side-out Inlay side-out Inlay side-out Inlay side-out
Core size
with adaptor insert
6 in [152 mm] 6 in [152 mm] 3 in [ 76 mm] 6 in [152 mm]
Maximum roll outer
diameter (not to exceed)
12 in [304 mm] 12 in [304 mm] 12 in [304 mm] 12 in [304 mm]
Average # of units per roll 20000 20000 20000 20000
Rev 01 01 01 01


Downloads

AD-227m5 RFID Datasheet

427 KB (PDF)

Product Portfolio: Avery Dennison RFID Solutions

864 KB (PDF)

CARE AND HANDLING: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

APPLICATIONS: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

WARRANTY: Please refer to Avery Dennison RFID standard terms and conditions.

PRODUCT INFORMATION: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

TRADEMARK STATEMENT: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.

© 2017 Avery Dennison Corp. ALL RIGHTS RESERVED.
170 Monarch Lane, Miamisburg, OH 45342, USA

Third party trademarks and/or trade names used herein are the property of their respective owner(s).

Some of the trademarks appear for identification purposes only.

*RAIN RFID is a global alliance promoting the universal adoption of UHF RFID technology. RAIN uses the GS1 UHF Gen2 protocol which ISO/IEC has standardized as 18000-63. Learn more about RAIN RFID here.

Get in Touch
Have questions about which Avery Dennison RFID solutions are right for your business?
Contact our RFID Sales Team.