AD-171m5

Common Applications:

  • Apparel and other item-level retail
  • Pharmaceutical and Healthcare

North America:
866-903-RFID (7343)

International Support:
+1-770-965-0807

UHF RFID Inlay: AD-171m5

AD-171m5

AD-380iM inlays
   
Dimensions: 1.063 x 0.551 in [27 x 14 mm]
Operating Frequency: Global (860 - 960MHz)
RF Protocol: ISO-18000-6C, EPC Class 1 Gen 2
Chip: Impinj® Monza® 5
EPC Memory: 128 bit
TID Memory: 96 bits with 48 bit unique serial number
Part Number 600385 600386
Format Dry Inlay Wet Inlay
Antenna dimensions (CDxMD) 1.063 x 0.551 in [27 x 14mm] 1.063 x 0.551 in [27 x 14 mm]
Die-cut dimensions N/A 1.2 x 0.7 in [30.5 X 17.8 mm]
Inlay substrate material PET PET
Inlay-to-liner adhesive N/A S-490 (FASSON)
Liner material N/A 1.5M Clear PET
Face sheet N/A N/A
Standard pitch 1.5 in [38.1 mm] 1.5 in [38.1 mm]
Standard web width 1.45 in [36.83 mm] 1.45 in [36.83 mm]
Total thickness over chip 10-13 mils [254-330.2 microns] 14-17 mils [356-431.8 microns]
Operating temperature -40 to 185F [-40 to 85C] -40 to 185 F [-40 to 85 C]
RoHS EU Directive 2011/65 EU Compliant EU Directive 2011/65 EU Compliant
Quality assurance 100% read tested with
out –of-tolerance inlay marked
100% read tested with
out-of-tolerance inlay marked
Un-wind direction Inlay-side Out Inlay-side Out
Core size
with adaptor insert
3 in [76.2 mm] w/foam on core 3 in [76.2 mm]
Maximum roll
outer diameter
(not to exceed)
13 in [330.2mm] 13 in [330.2 mm]
Average # of
units per roll
15,000 good 15,000 good
Rev 00 00


Downloads

AD-171m5 UHF RFID Datasheet

292 KB (PDF)

Product Portfolio: Avery Dennison RFID Solutions

864 KB (PDF)

CARE AND HANDLING: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

APPLICATIONS: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

WARRANTY: Please refer to Avery Dennison RFID standard terms and conditions.

PRODUCT INFORMATION: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

TRADEMARK STATEMENT: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.

© 2017 Avery Dennison Corp. ALL RIGHTS RESERVED.
170 Monarch Lane, Miamisburg, OH 45342, USA

Third party trademarks and/or trade names used herein are the property of their respective owner(s).

Some of the trademarks appear for identification purposes only.

*RAIN RFID is a global alliance promoting the universal adoption of UHF RFID technology. RAIN uses the GS1 UHF Gen2 protocol which ISO/IEC has standardized as 18000-63. Learn more about RAIN RFID here.

Get in Touch
Have questions about which Avery Dennison RFID solutions are right for your business?
Contact our RFID Sales Team.