AD-160u7

Common applications

  • Apparel and Retail
  • Cosmetic

North America:
866-903-RFID (7343)

International Support:
+1-770-965-0807

UHF RFID Inlay: AD-160u7

AD-160u7

AD-380iM inlays
   
Dimensions: 2.36 x 0.158 [60 x 4mm]
Operating Frequency: Global (860 - 960MHz)
RF Protocol: ISO-18000-6C, EPC Class 1 Gen 2
Chip: NXP UCODE 7
EPC Memory: 128 bits
TID Memory: 96-bit unique serialized TID Number
Part Number RF600529 100286
Format Dry inlay [4-up] Label
Antenna dimensions (CDxMD) 2.36 x 0.158 [60 x 4mm] 2.36 x 0.158 [60 x 4mm]
Die-cut dimensions N/A 2.52 x 0.236 in [64 x 6mm]
Inlay substrate material Clear PET Clear PET
Inlay-to-liner adhesive N/A S-490 (Fasson)
Liner material N/A 40# SCK
Face sheet N/A White Bopp
Standard pitch 1 in [25.4 mm] 1 in [25.4 mm]
Standard web width 3.25 in [82.55mm] 2.77in [25.4 mm]
Total thickness
over chip
7 - 8 mils
[178- 202 microns]
10 - 13 mils
[254 - 330 microns]
Operating
temperature
-40 to 185 F [-40 to 85 C] -40 to 185 F [-40 to 85 C]
RoHS EU Directive 2011/65/EU Compliant
EU Directive 2011/65/EU Compliant
Quality assurance 100% read tested with-of-tolerance
inlay marked
100% read tested with-of-tolerance
inlay marked
Un-wind direction Inlay-side Out Inlay-side Out
Core size
with adaptor insert
6 in [152.4 mm] 3 in [76.2 mm]
Maximum roll
outer diameter
(not to exceed)
17 in [431.8 mm] 12 in [304.8 mm]
Average # of
units per roll
30,000 good +/- 10% 10,000 good +/- 10%
Rev 01 01


Downloads

AD-160u7 UHF RFID Datasheet

189 KB (PDF)

Product Portfolio: Avery Dennison RFID Solutions

864 KB (PDF)

CARE AND HANDLING: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum.

APPLICATIONS: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.

WARRANTY: Please refer to Avery Dennison RFID standard terms and conditions.

PRODUCT INFORMATION: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.

TRADEMARK STATEMENT: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com.

© 2017 Avery Dennison Corp. ALL RIGHTS RESERVED.
170 Monarch Lane, Miamisburg, OH 45342, USA

Third party trademarks and/or trade names used herein are the property of their respective owner(s).

Some of the trademarks appear for identification purposes only.

*RAIN RFID is a global alliance promoting the universal adoption of UHF RFID technology. RAIN uses the GS1 UHF Gen2 protocol which ISO/IEC has standardized as 18000-63. Learn more about RAIN RFID here.

Get in Touch
Have questions about which Avery Dennison RFID solutions are right for your business?
Contact our RFID Sales Team.